About this how-to
In this video, we walk you through the complete step-by-step process for replacing the automatic transmission shifter assembly on a V35 chassis Infiniti G35 (Coupe and Sedan). Whether your shifter slider is cracked and binding, your manual mode (tiptronic) microswitches have stopped responding, or you are replacing a worn-out assembly, this video covers everything you need to know to get the job done right. What This Video Covers: Interior Disassembly: How to safely remove the shift knob, center console trim, and electrical connectors without breaking plastic clips. Under-Car Disconnection: Locating and unbolting the shifter linkage rod connected to the 5-speed automatic transmission. Assembly Removal: Unbolting the main shifter base from the transmission tunnel and pulling the unit from the cabin. Installation & Alignment: Dropping in the replacement assembly, reconnecting the linkage, and ensuring the shifter aligns perfectly with every gear selection (P,R,N,D, and Manual Mode). Tools Needed For This Job: Flathead screwdriver or plastic trim removal tools Needle-nose pliers (for the shift knob clip) 10mm and 12mm sockets with extensions Phillips head screwdriver Jack and jack stands (required to access the linkage under the vehicle) Vehicle Compatibility: This procedure applies to all automatic transmission models on the Nissan/Infiniti V35 platform, including: 2003–2007 Infiniti G35 Coupe 2003–2006 Infiniti G35 Sedan Nissan Skyline (V35)
Vehicle filters are based on the video title. Confirm your model, year, engine, and part fitment before starting.